Category Dishwasher

Who likes a kitchen full of dirty plates, when the dishwasher refuses to start? It feels awful, especially after a long day of cooking, and cleaning. A broken machine, however, does not mean the end of the world. Many small…

Since your Maytag dishwasher soap door stays shut, you likely find wet soap left behind after a cycle. This problem happens often, and it usually stems from a simple blockage or a worn part. You probably feel frustrated when dishes…

You might have a broken dishwasher, and you feel stuck. It takes up space, it looks bad, and it feels like a waste to just toss it in the trash. You want to do the right thing for the planet,…

As we set up a new disposal, water often stops flowing out of the dishwasher. This problem creates a big mess, and it feels very stressful for you. Many people forget one tiny detail when they connect a new unit.…

When your kitchen smells a bit funky, or you worry about germs inside your machine, you might think about using bleach. It is a strong tool, but you must be careful, because it can damage parts if used the wrong…

Each time a machine stops, it feels like a total headache, especially when a weird code pops up. The LC code on a Samsung dishwasher means there is a leak detected under the unit. Water is sitting in the bottom…

Whether you are fixing a leak, or you need to meet local code rules, adding an air gap feels like a big chore. It sounds technical, but it is really just a simple way to keep dirty sink water out…

Some days, things just stop working right, and a door that won’t stay shut is a real headache. You might feel stuck, frustrated, or worried about a big repair bill. But relax, because often the fix is quite simple. You…

The first thing to know is that power cords for dishwashers are usually sold separately. You might feel a bit nervous about messing with wires, but stay calm, because this job is actually quite simple. Most machines have a clear…

While a dishwasher works, sometimes it stops mid-cycle for no clear reason. You might see water sitting at the bottom, or maybe the machine just refuses to start. This usually happens because a small part, the float switch, gets stuck.…