How to Change Water Filter In LG Refrigerator: Easy Guide

You probably want clean, fresh water from your LG refrigerator, right? Changing the water filter is the best way to keep your water tasting great and your fridge working well. But if you’ve never done it before, it can seem confusing or tricky. Don’t worry! This article will show you everything you need to know, step by step. You’ll learn how to find, remove, and replace your LG refrigerator’s water filter with ease.

What Do I Need To Know Before Changing My LG Refrigerator Water Filter?

Before you start changing the water filter in your LG fridge, it’s important to understand some basics. This will help you do the job safely and correctly.

Why Is Changing The Water Filter Important?

Your refrigerator’s water filter traps dirt, chlorine, and other impurities from the water that comes into your fridge. Over time, the filter gets full and can’t clean water well anymore. If you don’t change it, water might taste bad or even cause damage to your fridge’s water system. Changing the filter keeps water fresh and helps your fridge work better.

How Often Should I Change My LG Refrigerator Water Filter?

Usually, LG recommends changing the water filter every six months. But this can depend on how much water you use and how clean your water is. If you notice the water tastes strange or the ice looks cloudy, it might be time to change the filter sooner. Some LG fridges have a filter indicator light that will tell you when the filter needs changing. Always pay attention to that if your fridge has it.

What Tools Or Supplies Do I Need?

The good news is that changing your LG water filter usually doesn’t need special tools. You just need a new filter that fits your LG fridge model. Make sure you buy the correct replacement filter because not all filters work with every fridge. Also, have a towel handy to catch any water that might drip during the change. That’s pretty much all you need.

How To Find The Right Water Filter For My LG Refrigerator?

Every LG fridge model may use a different type of water filter. You can find your model number inside your fridge or on the manual. Then, look for the recommended water filter for that model. You can buy filters online, at a store, or from LG’s official website. Using the right filter helps your fridge run smoothly and ensures the water is clean.

How Do I Locate The Water Filter In My LG Refrigerator?

Knowing exactly where your LG refrigerator’s water filter is located is the first real step to changing it. Different LG models have the filter in different places.

Checking Inside The Refrigerator

In many LG fridges, the water filter is inside the fridge compartment, usually at the top right corner or near the back. Open the fridge door and look for a small, round or rectangular filter housing. It might have a small label or icon showing a water drop.

Looking At The Base Grill Or Kick Plate

Some LG refrigerators have the water filter located outside, near the bottom front. This is the base grill or kick plate area. You might have to pull or unsnap a panel to find the filter. This spot is easier to reach for some people.

Referencing The User Manual Or Model Information

If you can’t find the filter inside or at the base grill, check your LG fridge’s user manual. It will have exact details and pictures showing where the filter is. You can also find the manual online by searching your fridge’s model number.

Signs To Confirm You Found The Filter

When you find a part that looks like a filter housing, it usually has a twist or push mechanism. It will be about the size of a water bottle or smaller. Sometimes it will have instructions printed on it. If you see this, you’ve found the right place!

What Are The Step-By-Step Instructions To Remove The Old Water Filter?

Once you know where the water filter is, the next step is to safely remove the old filter. This part is simple but requires care so you don’t spill water or damage your fridge.

Step 1: Turn Off The Water Supply (Optional But Recommended)

Before you remove the filter, it’s a good idea to turn off the water supply to your refrigerator if you can. This stops water from dripping or spraying when you remove the filter. The water valve is usually behind or under your fridge. Turning it off helps keep things neat.

Step 2: Prepare Your Work Area

Grab a towel or small bowl to catch any water that might drip. Also, make sure your hands are clean and dry. Standing in front of the filter, be ready to twist or pull the filter out carefully.

Step 3: Release The Old Filter

Most LG filters either twist or pull straight out. If it twists, turn it counterclockwise (to the left) slowly until it releases. If it pulls out, gently pull the filter toward you. You might feel some resistance, but don’t force it too hard.

Step 4: Handle The Old Filter Carefully

Once out, place the old filter on the towel or in the sink. Some water will come out of the filter or housing, so be prepared. Do not try to reuse the old filter, as it is no longer effective.

Step 5: Check The Filter Housing

Look inside the filter housing to make sure no pieces or debris are left behind. You can wipe it with a clean cloth if needed. This is also a good time to check for any damage.

How Do I Install The New Water Filter Correctly?

Putting the new water filter in the right way is just as important as removing the old one. Follow these detailed steps for a perfect install.

Step 1: Remove Packaging And Protective Covers

Take your new water filter out of the box and remove any plastic or protective caps on the filter ends. These caps keep the filter clean before use but must be removed before installation.

Step 2: Align The New Filter Properly

Look at the filter and the housing to see how they fit together. The filter usually has an arrow or notch to guide you. Hold the filter so it matches the direction or shape of the housing.

Step 3: Insert Or Twist The New Filter Into Place

If your filter twists in, push it into the housing and turn it clockwise (to the right) until it locks or feels secure. If it pushes in, firmly push the filter straight into the slot until it clicks or fits tightly.

Step 4: Turn On The Water Supply (If You Turned It Off)

If you had turned off the water supply earlier, now is the time to turn it back on. Slowly open the valve and listen for any leaks.

Step 5: Flush The New Filter

To get rid of any loose carbon bits or air, run water through the new filter for about 3 to 5 minutes. You can do this by using the water dispenser or by filling and emptying a large container. This step makes sure your water tastes fresh and clean.

Step 6: Reset The Filter Indicator Light

Many LG refrigerators have a filter change indicator. After installing the new filter, reset this light so it can remind you next time to change the filter. Check your fridge manual for how to do this, but usually it involves pressing and holding a button on the control panel for a few seconds.

How Can I Troubleshoot Common Issues After Changing The Water Filter?

Sometimes, after changing your LG refrigerator water filter, you might run into some small problems. Don’t worry! Here are ways to fix the most common ones.

Issue 1: Water Is Leaking From The Filter Area

If you notice water leaking near the filter, it might not be inserted correctly. Remove the filter and check for any cracks or dirt on the filter and housing. Clean the area with a towel, then reinsert the filter firmly. If it still leaks, check if the filter is the correct model for your fridge.

Issue 2: Water Taste Or Smell Is Bad After Filter Change

New filters can sometimes give water a strange taste or smell at first. This is normal. Flush the filter by running water through it for several minutes. If the bad taste continues after flushing, the filter might be defective, or you may need to change it again soon.

Issue 3: Water Flow Is Very Slow

If water comes out very slowly after changing the filter, the filter may be clogged or installed wrong. Try removing and reinstalling the filter. Also, make sure the water valve is fully open. If slow flow continues, try replacing the filter with a new one.

Issue 4: Filter Indicator Light Does Not Reset

If your fridge’s filter light stays on after changing the filter, you probably need to reset it manually. Check your fridge’s manual for the reset method. Usually, pressing and holding the water filter button or the reset button for about 3-5 seconds will work.

Issue 5: Ice Maker Stops Working After Filter Change

Sometimes the ice maker stops working right after a filter change because of air in the water line. Try running water from the dispenser to clear the line. If ice still isn’t made after a few hours, check the water supply or reset the fridge.

I hope this detailed guide makes changing your LG refrigerator’s water filter easy and stress-free. Fresh, clean water is just a few simple steps away!

Frequently Asked Questions (FAQs)

Is it necessary to turn off the water supply before changing the water filter?

It is not always necessary to turn off the water supply before changing the filter, but it is highly recommended. Turning off the water helps prevent leaks or water spraying when you remove the old filter. Some filters are designed to be changed without turning off the water, but if you want to be safe and avoid mess, turning off the water valve behind or under the fridge is a good step. It only takes a few seconds and can save you from cleaning up water spills.

Can I use any water filter for my LG refrigerator?

No, you should only use water filters designed for your specific LG refrigerator model. Using the wrong filter can cause poor water quality, leaks, or even damage your fridge. Each LG model has a recommended filter that fits perfectly and works properly. You can find the right filter by checking your fridge’s model number and matching it with the official LG filter or a trusted third-party filter that says it is compatible with your model.

Do I need tools to change the water filter?

Generally, you do not need any special tools to change an LG refrigerator water filter. Most LG filters are designed to be removed and installed by hand using a twist or pull mechanism. Having a towel ready to catch drips is helpful. If your fridge has a cover panel over the filter, you might need to open or remove that, but this usually does not require tools either.

Is it normal to see water dripping when changing the filter?

Yes, it is normal to see some water dripping or leaking a little when you remove the old water filter. The filter and housing hold water, so some will come out when you take it out. Using a towel to catch drips and turning off the water supply first can help reduce mess. Just be careful and remove the filter slowly.

Can I flush the water filter by running water from the dispenser?

Yes, flushing the water filter by running water through the dispenser is the best way to clear out any carbon particles or air bubbles from a new filter. It usually takes 3 to 5 minutes or about 2 to 3 gallons of water. This helps make sure the water tastes fresh and clean. Don’t skip this step after installing a new filter.

Do I need to reset the filter indicator light?

If your LG refrigerator has a water filter indicator light, you will need to reset it after installing a new filter. This light tracks how long you have used the filter and reminds you when it’s time to change it again. Resetting the light keeps the reminder accurate. Usually, pressing and holding a button on the fridge control panel for a few seconds resets the indicator.

Is it safe to drink water right after changing the filter?

It is safe to drink water after changing the filter, but it’s better to flush the filter first by running water through it for several minutes. This flush removes any loose carbon dust or particles from the new filter. Once flushed, your water will be fresh, clean, and safe to drink.

Can I leave the old water filter installed if I don’t have a replacement yet?

It is not a good idea to keep using an old water filter after its recommended lifespan. Old filters become clogged with impurities and lose their ability to clean the water. This can cause bad tasting water or even damage your fridge’s water system. If you don’t have a replacement filter, it is best to order one as soon as possible and change the filter promptly.